ATCO 20” catcher

6 posts / 0 new
Last post
JasonClark
Offline
Last seen: 2 weeks 4 days ago
Joined: 25/01/2018 - 11:58
ATCO 20” catcher

Hi all,

I have just come into possession of a 20” ATCO series 172055 mower num 20L52. Unfortunately it did not come with a catcher and I am after any info, specs or even photos of one so I can make one myself.

Any information would be helpful.

Cheers

wristpin
wristpin's picture
Offline
Last seen: 37 min 15 sec ago
Joined: 23/05/2012 - 22:09
Those numbers don't mean a

Those numbers don't mean a lot, a model name will help but best of all an IMAGE of the machine.

JasonClark
Offline
Last seen: 2 weeks 4 days ago
Joined: 25/01/2018 - 11:58
Sorry about the minimum

Sorry about the minimum information. Here is the mower in question and the front page of the manual book which I found on this site but I believe it to be an atco light. There are no other markings I can see (unless someone knows somewhere I’m not looking) apart from saying that it is a 2 stroke atco with a Villiers engine

wristpin
wristpin's picture
Offline
Last seen: 37 min 15 sec ago
Joined: 23/05/2012 - 22:09
Unfortunately a bit older

Unfortunately a bit older than any of my literature but the attached snap of a slightly later grass box may help. Hopefully, another forum contributor, more into earlier machines, will have something more useful.

 

  

JasonClark
Offline
Last seen: 2 weeks 4 days ago
Joined: 25/01/2018 - 11:58
Cheers for the help mate, I

Cheers for the help mate, I’ll see what I can do with that info.

gtc
Offline
Last seen: 9 hours 29 min ago
Joined: 12/04/2014 - 01:44
Here you go:

Here you go:

https://www.ebay.com.au/i/391977258921?chn=ps

Catchers or 'grass boxes' in any sort of reasonable condition can be hard to come by, especially for the less common larger sizes.