Grassbox - Dennis care

2 posts / 0 new
Last post
wristpin
wristpin's picture
Offline
Last seen: 4 hours 34 min ago
Joined: 23/05/2012 - 22:09
Grassbox - Dennis care

I have enjoyed Geoffrey Brooks's article on looking after a Dennis of a certain age.  My Dad purchased a new 30" machine in 1935 and continued to use it until it became too heavy for him and I inherited it and still have it. To be truthful it's a bit like Granny's broom -(3  new handles and 5 new heads!!) because the original "dry" rear roller was shot and one of my customers was outing a non running machine of similar age that had been fitted with a "wet" roller a few years previously so my machine is now an amalgam of the two!.

Any way, I was particularly interested in Geoffrey's description of a tool for undoing the cylinder bearing housing as in my tool box there is a very substantial box spanner the outer hex of which fits the hex recess on the bearing holder exactly and I have always assumed that it was a Dennis tool.As I also have two thin, offset open ended spanners that fit the vale adjusters I think that it is likely that they all belonged to the original tool kit including the grease gun and oil can.

In his article Geoffrey mentions a  Dennis article in a previous edition of Grassbox - does anyone know the edition number?

 

hillsider
hillsider's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 06/06/2010 - 20:42
Dennis care

http://www.oldlawnmowerclub.co.uk/sites/default/files/grassbox/GB82.pdf

I think the issue that you have in mind is number 82 the link above should take you to it.

Ray.