Punch recoil repair woes ..zzzzzzzzz

4 posts / 0 new
Last post
Chris G
Chris G's picture
Offline
Last seen: 3 hours 25 min ago
Joined: 22/08/2017 - 14:00
Punch recoil repair woes ..zzzzzzzzz

Hello, this will be the 3rd time on this particular recoil pulley where I have glued the plastic locating tab for one of the pawls.

Previous 2 times I have used JB weld and am about to try Q bond, but I think I am on a lost cause with it holding up.

Does anyone have a punch breaking or a spare they would part with to buy?

 

wristpin
wristpin's picture
Offline
Last seen: 2 hours 39 sec ago
Joined: 23/05/2012 - 22:09
Looks like yours is of the

Looks like yours is of the later reinforced type but I have a few of these (original pattern), if of any help.

sorry, the forum is on strike and won’t load the image, I’ll try again later

 

wristpin
wristpin's picture
Offline
Last seen: 2 hours 39 sec ago
Joined: 23/05/2012 - 22:09
(No subject)

Chris G
Chris G's picture
Offline
Last seen: 3 hours 25 min ago
Joined: 22/08/2017 - 14:00
Sorry for the late, late

Sorry for the late, late reply - yes please!

PM coming I hope, thanks for your help