1959 Swish-err

3 posts / 0 new
Last post
Ancient Astronaut
Offline
Last seen: 2 years 4 months ago
Joined: 02/06/2017 - 19:40
1959 Swish-err

I restored this in my spare time over the course of about two years. It's all done and running except i cant remember how or where the blade return spring is fastened.

Inside the blade housing on the right ride there is a square nut welded to the edge. I remember the spring hooked there. I thought at the time it may have been something someone added but now i am wondering if it was that way from the factory because of another picture i found on the WWW.

Do any of you guys have a Swisher of this vintage and can you show me a picture of the blade engagement area where the return spring is?

 

Larry

gtc
Offline
Last seen: 11 hours 46 min ago
Joined: 12/04/2014 - 01:44
Very nice job!

Very nice job!

wristpin
wristpin's picture
Offline
Last seen: 4 hours 3 min ago
Joined: 23/05/2012 - 22:09
A fine looking machine but as

A fine looking machine but as I assume that it was of US manufacture, I would think that the answer is more likely to come from your side of the pond than ours - but you never know.